|
|
|
| SKEW BEVEL HELICAL S |
 Back |
The low power bevel helical gearbox range, which was unavailable until today, is now ready by means of a brand new type of gearbox
for which mechanical system STM has been given the copyright.
This very new and innovative gearbox relies on helical gears with oblique shafts and puts together in a single conception the economical cost typical worm gearboxes and high efficiency typical of bevel helical gearboxes with right angle pair.
The 3 sizes being planned cover a torque range ranging from 100 Nm a 250 Nm and will supply every application the best product to optimise ratio torque/cost.
Ratio: Min 1/8 - Max 1/148.8
Torque (Nm): Min 70 - Max 250
Power (Kw): Min 0,15 - Max 2,12
| Size | Torque (Nm) | Power (Kw) | Ratio | | 25 | Min 70
Max 100 | Min 0,15
Max 1,28 | Min 1/8
Max 1/100 | | 35 | Min 90
Max 175 | Min 0,17
Max 1,7 | Min 1/8
Max 1/142.8 | | 45 | Min 110
Max 250 | Min 0,24
Max 2,12 | Min 1/8
Max 1/148.8 |
|
|
| GENERAL CATALOGUE |  |  |  |  |  |  |  |  |  | | Introduction |  | | | | | | | | | | Tecnhical Datasheet | | | | | | | | | | | Mounting Positions | | | | | | | | | | | Review | | | | | | | | | |
| MANUAL USE AND MAINTENANCE | | | GENERAL | | | | | | | | | |
|
|
Motion
